Wallpaper Seam Repair Adhesive

Seam Repair Adhesive is specially formulated to repair wallpaper tears and loose seam edges, as well as to bond overlapping edges of wallcoverings. The precision nozzle makes application into tight seams and loose edges easy.

Recommended Uses

  • Seals lifting edges/curling corners
  • Repairs tears
  • Bonds overlapping edges of wallpaper

Key Features

  • Tacks up in minutes
  • Strong adhesion
  • VOC (Actual): 0%
  • VOC (Regulatory): Zero ( As calculated per EPA Method 24 )

This product is currently out of stock and unavailable.

3-Ounce
3-Ounce
3-Ounce
3-Ounce
3-Ounce

ROMAN recommends contacting the retailer before purchase to ensure that the product you are looking for is available.

Instructions

Surface Preparation: Remove loose particles from behind wallpaper edge.
Dilution: Do not dilute.
Application Method: Remove cap. Apply Seam Repair adhesive in a thin, even coat. Press and smooth wallcovering into position. One application
should be sufficient. Allow Seam Repair 3-5 minutes to properly tack up before re-sealing difficult seams.
Clean-Up: Wipe off excess immediately with a damp cloth, and blot dry to ensure all residue is removed. Rinse all tools promptly with clean water.

Limited Warranty

Roman Products, LLC warrants that it will replace this product free of charge, if, within 12 months of manufacture, it is found to be defective in material or workmanship. This warranty is in lieu of any other. The exclusive remedy is limited to the replacement of the product and Roman disclaims all liability for consequential, punitive, and special damages. Conditions of use are beyond our control.

Caution

Store in a cool, dry place. DO NOT FREEZE! Do not take internally. In case of ingestion, seek medical attention. Avoid contact with skin and eyes. Use of skin and eye protection is recommended at all times. If contact with eye occurs, flush with water for 15 minutes. If skin contact occurs, wash with soap and water. Seek medical attention if rash or other symptoms occur. Do not mix with other chemicals. Use in a well-ventilated work area. Close container after each use. Keep out of reach of children.

Reviews

There are no reviews yet.

Be the first to review “Wallpaper Seam Repair Adhesive”

Specifications

           
Product Type Wallpaper Adhesive
VOC (Regulatory) Zero per EPA Method 24
Viscosity Approximately 5,000 cps
pH Level 4.5
Color White
Interior/Exterior Interior
Strippable Not Strippable
Drying Time Drying time will vary depending on the temperature, ventilation and humidity of the room.
Product Storage Do not freeze. Keep in a cool, dry place.
Dilution Rate Do not dilute

Safety Data Sheets

Technical Data Sheets

USDA CERTIFIED BIOBASED

ROMAN products featuring a “USDA® Certified BioBased Product” logo have achieved third-party verification of biobased content and have earned USDA Certification.

BioBased products are commercial or industrial products composed, in whole or in significant part, of biological products such as renewable domestic agricultural materials like corn and wheat. These BioBased products provide an alternative to conventional petroleum derived products.

For more information on the USDA BioPreferred program, please visit: https://www.biopreferred.gov/BioPreferred/faces/pages/AboutBioPreferred.xhtml