ROMAN recommends contacting the retailer before purchase to ensure that the product you are looking for is available.
785 Strippable Heavy Duty Clear Wallcovering Adhesive
This item is no longer available
ROMAN’s 780 Machinable Heavy Duty Clear Wallcovering Adhesive is recommended as an alternative.
ROMAN’s 785 Strippable Heavy Duty Clear is recommended for installing medium to heavy weight wallcoverings. An ideal adhesive for jobs that require strippability, it is formulated to allow for future removal of fabric-backed vinyl wallcoverings from unprimed drywall without damage to the drywall surface.
- Ideal for medium weight to heavyweight wallcoverings, including commercial vinyl.
- Dry strippable
- Cleans up easily with water
- Covers up to 280
- VOC (Regulatory): < 5 g/L
Surface Preparation: Surface must be free from grease and other residues, dry, smooth and structurally sound. Check surfaces for paint bonding, loose wallcoverings, damaged wall-board or plaster. Repair all unsound surfaces. Priming of bare drywall is not required with fabric-backed wallcoverings. Before proceeding with any unusual conditions, consult your adhesive or wallcovering supplier.
Application Method: Use only when the room temperature is above 60°F. Apply an even coat of adhesive with a paint roller, brush, or pasting machine. Follow the wallpaper manufacturer’s instructions to paste the paper or paste the wall. Book wallpaper according to the instructions.
Avoid contact with the surface of embossed, textured or delicate wallcoverings.
Clean-Up: Before the adhesive dries, remove any excess with clean water. Additional effort may be required if the adhesive is allowed to contact the surface of embossed or textured vinyls.
If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
Roman Products, LLC does not endorse the use of any product in an installation that does not meet a Class A fire rating or any applicable code. Testing by a certified laboratory should be conducted to verify that the installation meets a Class A fire rating and to guarantee compliance with all applicable codes. Specifically, if a Roman product is used to hang wallpaper over existing wallpaper, it is unlikely to meet these standards.
ROMAN Products, LLC warrants that it will replace this product free of charge, if, within 12 months of manufacture, it is found to be defective in material or workmanship. This warranty is in lieu of any other. The exclusive remedy is limited to the replacement of the product and ROMAN disclaims all liability for consequential, punitive, and special damages. Conditions of use are beyond our control.
Store in a cool, dry place. Do not take internally. In case of ingestion, seek medical attention. Avoid contact with skin and eyes. Use of skin and eye protection is recommended at all times. If contact with eye occurs, flush with water for 15 minutes. If skin contact occurs, wash with soap and water. Seek medical attention if rash or other symptoms occur. Do not mix with other chemicals. Use in a well-ventilated work area. Close container after each use. Keep out of reach of children.
|Product Type||Clear Wallcovering Adhesive|
|Coverage||Approximately 280 square feet per gallon.|
|VOC (Regulatory)||< 5 grams/Liter|
|Strippable||Strippable with fabric-backed vinyl wallcoverings once dry.|
|Drying Time||Drying time will vary depending on the temperature, ventilation and humidity of the room.|
|Product Storage||Do not freeze. Keep in a cool, dry place.|