3-Ounce | ||||
3-Ounce | ||||
3-Ounce | ||||
3-Ounce | ||||
3-Ounce |
ROMAN recommends contacting the retailer before purchase to ensure that the product you are looking for is available.
Seam Repair Adhesive is specially formulated to repair wallpaper tears and loose seam edges, as well as to bond overlapping edges of wallcoverings. The precision nozzle makes application into tight seams and loose edges easy.
3-Ounce | ||||
3-Ounce | ||||
3-Ounce | ||||
3-Ounce | ||||
3-Ounce |
ROMAN recommends contacting the retailer before purchase to ensure that the product you are looking for is available.
Surface Preparation: Remove loose particles from behind wallpaper edge.
Dilution: Do not dilute.
Application Method: Remove cap. Apply Seam Repair adhesive in a thin, even coat. Press and smooth wallcovering into position. One application
should be sufficient. Allow Seam Repair 3-5 minutes to properly tack up before re-sealing difficult seams.
Clean-Up: Wipe off excess immediately with a damp cloth, and blot dry to ensure all residue is removed. Rinse all tools promptly with clean water.
Roman Products, LLC warrants that it will replace this product free of charge, if, within 12 months of manufacture, it is found to be defective in material or workmanship. This warranty is in lieu of any other. The exclusive remedy is limited to the replacement of the product and Roman disclaims all liability for consequential, punitive, and special damages. Conditions of use are beyond our control.
Store in a cool, dry place. DO NOT FREEZE! Do not take internally. In case of ingestion, seek medical attention. Avoid contact with skin and eyes. Use of skin and eye protection is recommended at all times. If contact with eye occurs, flush with water for 15 minutes. If skin contact occurs, wash with soap and water. Seek medical attention if rash or other symptoms occur. Do not mix with other chemicals. Use in a well-ventilated work area. Close container after each use. Keep out of reach of children.
You must be logged in to post a review.
Product Type | Wallpaper Adhesive |
VOC (Regulatory) | Zero per EPA Method 24 |
Viscosity | Approximately 5,000 cps |
pH Level | 4.5 |
Color | White |
Interior/Exterior | Interior |
Strippable | Not Strippable |
Drying Time | Drying time will vary depending on the temperature, ventilation and humidity of the room. |
Product Storage | Do not freeze. Keep in a cool, dry place. |
Dilution Rate | Do not dilute |
Safety Data Sheets
Technical Data Sheets
Reviews
There are no reviews yet.